WANTED - fanuc triac levelling pad and buttons

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

WANTED - fanuc triac levelling pad and buttons

Post by jamesgates1000 » Thu 24 Sep , 2015 12:32 pm

Hi,

Wondered if anyone can help, i have a denford triac and cyclone. Both are missing the key to turn off program lock.
Has anyone got a spare lock and key i can replace mine with. Also looking for a fanuc green push button for atc rotate and one of the rubber levelling pads.

Thanks

jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Re: WANTED - fanuc triac levelling pad and buttons

Post by jamesgates1000 » Thu 08 Oct , 2015 14:43 pm

I have sourced a replacement green button and rewired the keyed swiches to enable program edit.

Still looking for one levelling pad though!

Post Reply