Cyclone power chuck wanted

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Cyclone power chuck wanted

Post by jamesgates1000 » Tue 18 Aug , 2015 20:50 pm

If anyone has an cyclone power chuck for sale please let me know. Cheers james
Last edited by jamesgates1000 on Fri 05 Feb , 2016 0:27 am, edited 1 time in total.

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: Cyclone power chuck wanted

Post by angel-tech » Tue 18 Aug , 2015 21:17 pm

what d fitting does your lathe have

jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Re: Cyclone power chuck wanted

Post by jamesgates1000 » Fri 21 Aug , 2015 11:52 am

Hi,
thanks for the quick reply. Didnt expect that!
I have just invested in a couple of denford machines, still in the process of getting my workshop wired up to power them, havent had a chance to open the lathe up and have a look at what mounting it is yet.
A power chuck would really help with some of the jobs that I need to do on the machine.
It is a 2001 Cyclone with toolchanger and Fanuc 21i control, the serial number is H00913.
There is just a standard 3 jaw chuck on it at the moment and it doesnt have any of the pneumatic fittings for an air chuck, is it possible to add a power chuck and the fittings to a machine like this?

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: Cyclone power chuck wanted

Post by angel-tech » Sat 22 Aug , 2015 0:09 am

saying that i think the cyclone is a direct fit chuck, so you'll have to figure out what nose the cyclone has.

jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Re: Cyclone power chuck wanted

Post by jamesgates1000 » Tue 02 Feb , 2016 23:17 pm

Been busy so only just had a chance to take the chuck off so I'm resurrecting this post!
The cyclone has an a2-3 nose on it, does anyone have a spare air chuck and associated plumbing for a fanuc cyclone? Or details on where I can get it?

Thanks

Post Reply