Easimill TCN355 machine wiring schematics

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Burrowtech
Posts: 2
Joined: Wed 12 Jun , 2013 9:04 am
Hardware/Software: Easimill with Heidenhain TNC 355

Easimill TCN355 machine wiring schematics

Post by Burrowtech » Thu 13 Jun , 2013 0:10 am

Hello all!
I have an Easimill s/n EM26108A with Heidenhain TNC 355 (Feb 1989)
Can anyone help me out with a set of machine wiring schematic drawings please?

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Easimill machine wiring schematics

Post by Denford Admin » Thu 13 Jun , 2013 8:52 am

Sorry I've never seen any drawings for a Heidenhain version of that machine.
The best we have are the TNC manuals:
viewtopic.php?f=15&t=2256

Burrowtech
Posts: 2
Joined: Wed 12 Jun , 2013 9:04 am
Hardware/Software: Easimill with Heidenhain TNC 355

Re: Easimill machine wiring schematics

Post by Burrowtech » Tue 18 Jun , 2013 20:30 pm

Hello all

I have now spent some time tracing wiring and have now created some schematics; they are a bit simplistic at the moment but if anyone is in a similar predicament, then I may be able to help you out a little.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Easimill machine wiring schematics

Post by Denford Admin » Wed 19 Jun , 2013 8:52 am

Thanks, it'd be great if you could zip them or .pdf them and post up here...anyone with an Heidenhain control would find them useful.

Post Reply