Canned cycles

All info relating to the Denford Mirac lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
tractorman
Posts: 10
Joined: Tue 27 Oct , 2009 13:30 pm

Canned cycles

Post by tractorman » Mon 13 May , 2013 10:57 am

Hi
I have a VMC 1300 could anybody please tell me where I can find G codes or macro's for rectangular pocket and circular pocket milling
Thank's
Martin

User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Canned cycles

Post by Denford Admin » Mon 13 May , 2013 11:46 am

viewtopic.php?p=483

There are some macro programs installed on the VR Milling v5 CD:
CDROM:\VRMilling5\Personal\Denford\CNC Files

tractorman
Posts: 10
Joined: Tue 27 Oct , 2009 13:30 pm

Re: Canned cycles

Post by tractorman » Mon 13 May , 2013 13:36 pm

Thank you

Post Reply