I have some electrical spares including cd stepperdrives spindle control drive plus encoder bits available. If some one would like to make an offer & collect the parts they are welcome. contact me on:
Tel 01707 331565
Email gary.tessier@sky.com
I live in Welwyn garden city, Hetfordshire
Will try to add some pics later
Denford Orac spares
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 1
- Joined: Thu 19 Jan , 2012 15:08 pm
- Hardware/Software: Denford Orac circa 1986
-
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Denford Orac spares
i'm interested gary, i'll ring you in the morning.
Re: Denford Orac spares
hI
Do you still have the spindle encoder strip as mine does not work anymore
Thanks
Paul
Do you still have the spindle encoder strip as mine does not work anymore
Thanks
Paul
-
- Posts: 3
- Joined: Fri 01 Mar , 2013 17:30 pm
- Hardware/Software: I was registered here about 7 years ago but forgot my password so, i have to register again...Sorry
Re: Denford Orac spares
Hi all!
I have just joint the club and English is not my native language. Actually I am watching this forum from Athens where i come from. And here comes my first question regarding the Orac's three phase frequency inverter. Do you sell this item as well?
And what year yours was made? Can you send a picture of the aluminum data plate?
Mine was manufactured in 1985 and was running fine until a friend tried to use it and damaged the main motor electronics. I have found 2 gray wires broken there and i think these were connected to some kind of low frequency choke. But it is not there. I resume this from pictures of similar machines of other Orac owners.
If there are other Orac owners with their lathe unmodified maybe they can help by exchanging pictures of the rear of the machine and some data they may have handy....Regards to all of you.
Dimitris K
I have just joint the club and English is not my native language. Actually I am watching this forum from Athens where i come from. And here comes my first question regarding the Orac's three phase frequency inverter. Do you sell this item as well?
And what year yours was made? Can you send a picture of the aluminum data plate?
Mine was manufactured in 1985 and was running fine until a friend tried to use it and damaged the main motor electronics. I have found 2 gray wires broken there and i think these were connected to some kind of low frequency choke. But it is not there. I resume this from pictures of similar machines of other Orac owners.
If there are other Orac owners with their lathe unmodified maybe they can help by exchanging pictures of the rear of the machine and some data they may have handy....Regards to all of you.
Dimitris K