Triac atc carousel tool clamp gripper wanted

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Triac atc carousel tool clamp gripper wanted

Post by angel-tech » Thu 19 Jul , 2012 17:21 pm

as in the title i need one of the eight grippers and it's holder for a triac atc. That's the flexible gripper and the half round mount that makes up the tool holder in the carousel.
Bit of a long shot but you never know.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: Triac atc carousel tool clamp gripper wanted

Post by bradders » Fri 20 Jul , 2012 9:19 am

MCV2/711 Tool Holder Roller - 2 required per tool holder - £18.00 each
TR3/728A Tool Holder Spring - 1 required per tool holder - £8.00 each

These prices are ex P&P and VAT

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: Triac atc carousel tool clamp gripper wanted

Post by angel-tech » Fri 20 Jul , 2012 9:28 am

and i need the ally block that holds the tool holder spring in place.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Triac atc carousel tool clamp gripper wanted

Post by Denford Admin » Fri 20 Jul , 2012 10:00 am

Have added some detailed drawings of the triac tool carousel
viewtopic.php?f=47&t=3812

jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Re: Triac atc carousel tool clamp gripper wanted

Post by jamesgates1000 » Thu 01 Feb , 2018 10:21 am

Are there any of the springs still available?

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Triac atc carousel tool clamp gripper wanted

Post by Steve » Thu 01 Feb , 2018 13:23 pm

The spring is still used on the current VMC1300 Toolchanger as a VMC/0721 The price is now £11.50 plus Vat

The old spring had to be drilled the new one is punched for the locating screw.

Post Reply