I have volunteered to help a local school in getting a Microrouter v4 pro ns up and running. The machine was donated by another educational site which was closing. Serial no is H02679, of September 2002. As far as I can tell all they have is the machine, no software or manuals.
My immediate need is to get hold of manuals, so that I can find out what questions to ask next. A quick scan of this site didn't appear to show any for download, but I may have been looking for the wrong thing.
Thanks
Dave
(Brockley, SE London)
Where do I start...
Moderators: Martin, Steve, Mr Magoo
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: Where do I start...
Contact Denfords.
Tel 01484 728000
The Microrouter Pro was dispatched with VR Milling Ver 2 software, you need to be looking to purchase this software or alternatively upgrade to VR Milling Ver 5 with USB conectivity
Tel 01484 728000
The Microrouter Pro was dispatched with VR Milling Ver 2 software, you need to be looking to purchase this software or alternatively upgrade to VR Milling Ver 5 with USB conectivity
-
unravelled
- Posts: 2
- Joined: Mon 12 Sep , 2011 14:59 pm
Re: Where do I start...
Thanks for the information. I've contacted Denford and got rough prices, now to see if the school can chase up the original software to save money.
thanks
Dave
thanks
Dave