Techsoft to Graphtec 3000 60

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Techsoft to Graphtec 3000 60

Post by bradders » Tue 21 Mar , 2006 12:50 pm

How do i connect a Graphtec 3000 60 to accept Techsoft output ?
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Tue 21 Mar , 2006 12:51 pm

Graphtec 3000-60 to Techsoft link

Select Roland Camm CM24 from Techsoft PLOT list
Select CONNECTIONS
Select the correct COM PORT
Top
Post Reply

Return to “Software”