Page 1 of 1

altering feed and speed in auto mode VR Milling 2.16

Posted: Mon 19 Feb , 2018 21:17 pm
by Akorenika
Hi, I have a Novamill without the Feed and Speed override knobs fitted to the machine. I use VR Milling version 2.16 and in Auto mode the I can't alter Feed and Speed at all. They are set at 75% and 85% respectively. Is there a way to get the sliders or F5 to F8 buttons working? Alternatively how can I fit physical override pots? Any help would be greatly appreciated.

Regards

Adrian

Re: altering feed and speed in auto mode VR Milling 2.16

Posted: Tue 20 Feb , 2018 0:03 am
by Martin
If you disconnect from the machine then go in to Setup Machine arameters (password is denny) the machine capability then untick both the feed & spindle override pots.

Re: altering feed and speed in auto mode VR Milling 2.16

Posted: Tue 20 Feb , 2018 1:07 am
by Akorenika
Much obliged

Regards Adrian