Updating software

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
jspink
Posts: 2
Joined: Mon 12 Dec , 2016 16:44 pm
Hardware/Software: Denford Desktop Tutor
CNC Turn tutor, DENFORD FANUC Turning v1.34
CNC Mill Tutor, DENFORD HEIDEN MILLING v1.105

Updating software

Post by jspink » Mon 12 Dec , 2016 16:48 pm

Hi,

I'm running the following software on windowns 98:

Denford Desktop Tutor
CNC Turn tutor, DENFORD FANUC Turning v1.34
CNC Mill Tutor, DENFORD HEIDEN MILLING v1.105

Is there an update for this software that will allow me to run it on windows 7 and without the security dongle?

Best Regards,

Joe

TDIPower
CNC Guru
CNC Guru
Posts: 613
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: Updating software

Post by TDIPower » Mon 12 Dec , 2016 21:33 pm

There is a page which lists all the software and what it will run, I can never find it when people ask BUT it does exist as I do stumble on it from time to time when digging about.... Wait on....

http://website.denford.ltd.uk/support/9 ... s-software

http://website.denford.ltd.uk/support/8 ... a-win7-art

Does that help?

This big issue with win7 onwards machines I believe is that the processor structure won't support early software (you can't run a DOS box either).

Pete

jspink
Posts: 2
Joined: Mon 12 Dec , 2016 16:44 pm
Hardware/Software: Denford Desktop Tutor
CNC Turn tutor, DENFORD FANUC Turning v1.34
CNC Mill Tutor, DENFORD HEIDEN MILLING v1.105

Re: Updating software

Post by jspink » Thu 15 Dec , 2016 10:45 am

Thanks very much for the reply, Pete.

I appreciate it.

Joe

Post Reply