We have an easiturn lathe and programmed it successfully through the denford text editor software, the print option in the dos screen had an option to save as a lst file or print, print did not function but we were able to save a lst file which we could print through notepad.
The hard disc died and I have reinstalled the software on a new disc, Unfortunately I cannot remember where this option is located, also whilst the baud rates, parity settings etc have been retained successfully, again where is this facility located.
Thanks in anticipation
Techy
Print feature, config denford easiturn text editor
CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.
Moderators: Martin, Steve, Mr Magoo
Jump to
- Welcome
- ↳ Please read these first...
- ↳ Announcements
- CNC / Machines
- ↳ Machines
- ↳ Compact 1000
- ↳ Cyclone
- ↳ EasiMill / EasiTurn
- ↳ Meteor
- ↳ Micromill / Microturn
- ↳ MicroRouter
- ↳ MicroRouter Compact
- ↳ MicroRouter Vertical / MaxiRouter
- ↳ Mirac
- ↳ Novamill
- ↳ NovaTurn
- ↳ Orac
- ↳ PCB Engraver
- ↳ Quatro
- ↳ Router 2600
- ↳ Senior (Tom)
- ↳ StarMill
- ↳ StarTurn
- ↳ Triac
- ↳ Triton
- ↳ Turn270
- ↳ VersaLaser
- ↳ Viceroy
- ↳ VMC 1300
- ↳ ZeroCentre/ZeroTurn/ZeroBore
- ↳ Electronics
- ↳ Software
- ↳ Downloads
- CAD / CAM Software
- ↳ QuickCAM / LaserCAM 2D Design
- ↳ QuickCAM 3D/PRO/4D
- ↳ QuickTURN 2D Design
- ↳ TechSoft 2D Design
- ↳ Post Processors
- ↳ Solidworks
- ↳ VR Milling - All Versions
- ↳ VR Turning - All Versions
- ↳ Other CAD CAM and CNC
- 3D Printing / Rapid Prototyping
- ↳ UP! 3D Printer
- General
- ↳ Project Of The Week
- ↳ Denford Classifieds
- ↳ F1 / 4x4 / GT Racing In Schools
- ↳ Suggestions and Feedback
- ↳ User Stories / Projects / Courseware
- CIM
- ↳ Robots / CIM / VR CIM
- Random Picture Galleries
- ↳ Vintage Pictures