Acrylic settings for 6600 in VR Milling/Quickam 2D

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
wheeliebin
Posts: 1
Joined: Tue 10 Nov , 2015 17:45 pm
Hardware/Software: Router 6600 Pro

Acrylic settings for 6600 in VR Milling/Quickam 2D

Post by wheeliebin » Tue 10 Nov , 2015 17:51 pm

Hi

Can anyone tell me the speed, feedrate, etc using a 1mm single flute straight cutter in acrylic on the 6600 pro

thanks

Post Reply