Access violation at address

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
seanm
Posts: 1
Joined: Tue 27 Aug , 2013 12:24 pm
Hardware/Software: Connect Major/ VR Milling version 2.3

Access violation at address

Post by seanm » Tue 27 Aug , 2013 12:37 pm

Hi,
Myself and a friend recently bought an old Connect Major milling machine running VR Milling 2.3.We connected the machine to pc and we are able to jog the axis and turn on spindle.However when we import a gcode file from Techne cad/cam and try to run it we get the following error: "Access violation at address74E487A9 in module 'RICHED20.DLL'.Write off address 0040474E".
Any help is much appreciated as we are total novices at CNC.

Post Reply