Missing Tools

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
bugs
Posts: 1
Joined: Tue 23 Apr , 2013 8:58 am
Hardware/Software: MRC40
QuickCAM2D Design
VR Milling
VR Turning

Missing Tools

Post by bugs » Tue 23 Apr , 2013 10:01 am

Hi All,

We currently use QuickCAM 2D Design, VR Milling and VR Turning. One of my colleagues has noticed when he has logged in there are no materials available (not even the default ones). So far I have tried re-installing the software, re-setting his profile and even copying the materials files. but so far nothings has got them to re-appear.

Can anyone suggest anything we are using a RM CC4 network, with Windows 7 clients.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Missing Tools

Post by Denford Admin » Tue 23 Apr , 2013 11:01 am

This will help you see where the files are and how it works:
/viewtopic.php?f=1&t=3073

Part of the problem is that settings files which need to be changed/saved by the user used to be stored in "all users\application data\denford"
However, windows vista, 7 and 8 won't allow writing to that location without raised privileges.
Later software will install tooling/material setup files into "all users\app data\denford", then copy those original files to the users own "app data" folder if they don't already exist there.
It might be worth trying the latest versions of the software.

Post Reply