VR Milling 2.22 with Novamill

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
jcotton
Posts: 8
Joined: Wed 18 Mar , 2009 16:05 pm

VR Milling 2.22 with Novamill

Post by jcotton » Tue 27 Sep , 2011 19:56 pm

In the VR Milling screen (V2.22), with a Novamill connected and ON,...the "machine parameters" under 'set up' are greyed-out. Any ideas on how to solve/ make available?
Top
Martin
CNC Guru
CNC Guru
Posts: 1898
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: VR Milling 2.22 with Novamill

Post by Martin » Tue 27 Sep , 2011 20:35 pm

You need to disconnect from the machine.

You should update to the latest version of VRMilling which can be downloaded from the Denford website. Make sure you have the licence code\dongle first though.
Top
jcotton
Posts: 8
Joined: Wed 18 Mar , 2009 16:05 pm

Re: VR Milling 2.22 with Novamill

Post by jcotton » Tue 27 Sep , 2011 20:38 pm

OK, I will try this immediately. Thank You for the quick reply.
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: VR Milling 2.22 with Novamill

Post by Denford Admin » Wed 28 Sep , 2011 9:13 am

When he says disconnect from the machine, he means by pressing the machine link button in the software (ie don't disconnect the cable)
Machine parameters are not available in VR whilst the software is connected to the machine.
Top
jcotton
Posts: 8
Joined: Wed 18 Mar , 2009 16:05 pm

Re: VR Milling 2.22 with Novamill

Post by jcotton » Wed 28 Sep , 2011 12:59 pm

Yes Sir, I understand that. Thank You for having such a helpful forum. Cheers.
Top
Post Reply

Return to “Software”