Denford Starturn

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
1081275
Posts: 3
Joined: Mon 06 Apr , 2009 8:40 am

Denford Starturn

Post by 1081275 » Mon 06 Apr , 2009 20:57 pm

Hello,

I have two Starturn lathes but i don't the machine software because the old computers has broken. but now i only have computers with windows vista, so i want to know if there any software that i can use is this kind of operating system. i where i can get information about the machine, manuals and schematics.

thanks
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 07 Apr , 2009 9:36 am

There is allsorts of info on this forum:

Dos software choices:
viewtopic.php?t=196
Dos Software free downloads:
http://www.denford.ltd.uk/index.php?opt ... &Itemid=51
Starturn problems:
viewtopic.php?t=1113
Dosbox:
viewtopic.php?t=844
Top
Post Reply

Return to “Software”