edgecam post

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
ehawkins
Posts: 1
Joined: Tue 02 May , 2006 22:26 pm

edgecam post

Post by ehawkins » Tue 02 May , 2006 22:32 pm

Does Denford have a post processor for edgecam? I have a micromill running VR 2.
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Wed 03 May , 2006 10:22 am

You should be able to use the standard Fanuc format post.

Otherwise contact EdgeCAM direct.
Top
Post Reply

Return to “Software”