Triac VMC year 2000 I need floppy disc to boot

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
spacom
Posts: 3
Joined: Thu 20 Sep , 2007 21:19 pm

Triac VMC year 2000 I need floppy disc to boot

Post by spacom » Sun 07 Oct , 2007 17:11 pm

Hi Every one,
Can you help, got a triac vmc from a colledge, but I thought I got the right software, but they infact they give me CIM robot software,
anyway my triac vmc is a 2000 year and serial number is H00236
I need the software to boot the machine up,
any help would be great,
Thanks
Les

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Sun 07 Oct , 2007 21:25 pm

http://www.denford.ltd.uk/index.php?opt ... &Itemid=51

I think it is Fanucmd you need.

You will need to make the disc a boot disc (system).

trident
Posts: 22
Joined: Thu 05 Mar , 2009 9:31 am

Triac VMC software

Post by trident » Thu 12 Mar , 2009 19:50 pm

I need the software for the mill, I have the VR milling software, but is there something esle used to run the mill it's self, the computer crashed, lost everything.

Triac VMC
Serial # EO4231
Serial of Electrics is used 000012028
Export # 4281
Dispatch date April 93

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Thu 12 Mar , 2009 21:34 pm

You will need the licence disc that was supplied. It is normally on a floppy disc. It may be worth downloading the latest version of VRMilling from the Denford wedsite. Make sure you download the correct version. Version 2 or 5.

Post Reply