Found a font convertor app for MillCAM designer

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3589
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Found a font convertor app for MillCAM designer

Post by Denford Admin » Mon 27 Mar , 2006 10:29 am

A useful little app (which used to be available from our old website)
to convert window TrueType (TTF) fonts into MillCAM designer fonts is avilable here: http://www.denfordata.com/projectimages/ttfmcd16.zip

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1267
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Tue 28 Mar , 2006 15:18 pm

I guess you can convert any TT font? Once converted where do you put the new file?

User avatar
Denford Admin
Site Admin
Posts: 3589
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Tue 28 Mar , 2006 15:26 pm

The app installed by default into C:\Denford\ttfmcd16
and the fonts output by default into c:\denford\fonts
if you want to change font in MillCAM, then you can browse from the text tool (click fonts button), to where the font has been created - *.fnt

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1267
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Tue 28 Mar , 2006 17:09 pm

Thanks will try this! :D

Post Reply