VR Turning 6.16 released 5th February 2024
Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/
//5th February 2024
The acceleration on the X and Y axes on the Turn 270 and Turn 370 has been decreased slightly. It was occasionally possible to stall the axes with the feed override set to be 150%.
VR Turning 6.16 released 5th February 2024
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: