VR Turning v1.31 released 16th Jan 2013

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.31 released 16th Jan 2013

Post by Denford Admin » Thu 18 Oct , 2012 9:39 am

// v1.31 - 10/1/2013 - Changed MDI background image
// v1.31 - 16/1/2013 - Fixes to install. The new install wasn't altering the .ini files in \program files\denford\vrturning\config but adding small ones to \program files\denford\vrturning\
... this could be the cause of some issues with older machine that don't use BigMint2 (since updating the installation in v1.29) as the .mnt file in the machine's .ini may not have been set correctly by the installer.

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply