VR Turning v1.33 released 25th June 2013

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.33 released 25th June 2013

Post by Denford Admin » Thu 18 Oct , 2012 9:39 am

// v1.32 - 25/1/2013 - Fix to G81 cycle so that it is modal, eg G81 Z-10; Z-20; Z-30 will remain in G81 drilling mode until G0/1/2 or 3 is programmed
// v1.32 - 31/1/2013 - Fix to Print > offsets to show the X offset value as a diameter if not in RadiusProgramming mode
// v1.32 - 19/3/2013 - added Turn370, nb Now, if Tool Change Auto type is set to -1 then VRT and Mint uses the nvLong[19] location to determine turret type.
// v1.32 - 19/3/2013 - if mint files per machine don't exist, the file missing error can be removed by adding BigMint2.mnt to the .ini file: Mint File=C:\Program Files\Denford\VRTurning\BigMint2.mnt
// v1.32 - 21/3/2013 - fix so Toollist.current is updated when the control panel Tool number changes (eg. when homing and turret changes to tool 1 without a Tool call)
// to do with error where tool editor opened up with wrong tool showing.
// v1.32 - 21/3/2013 - changes in control panel - button is now spindle on/off

// v1.33 - 24/6/2013 - fix to TP135 toolchange to compensate for bouncing strobe switch

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

User avatar
dixonsca
CNC Apprentice
CNC Apprentice
Posts: 69
Joined: Tue 19 Sep , 2006 17:04 pm
Hardware/Software: Denford Magnum router. (now upgraded to a 3d router using retrofit kit macmotion controller and upgraded stepper motors)
Triac PC
Nova mill
Microrouter
Turn 270 Pro
Unimatic 4th axis
Makerbot Replicator 2
VR Milling 5
techsoft 2d design
corel draw
solidworks
artcam
lathecam designer
quickturn 2d
Location: Bradford
Contact:

Re: VR Turning v1.33 released 25th June 2013

Post by dixonsca » Wed 11 Sep , 2013 15:22 pm

Will installing the updates re-set VR Turning back to its default settings?

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: VR Turning v1.33 released 25th June 2013

Post by Steve » Wed 11 Sep , 2013 16:32 pm

In what respect?

You can backup and save offsets and datums first.

You could also print the values.

I think most settings would be set back to default.

Post Reply