VR Turning v1.29 released 24th Aug 2012

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.29 released 24th Aug 2012

Post by Denford Admin » Fri 24 Aug , 2012 15:45 pm

// v1.29 - fix to Carousel and offsets form to allow you to type in offset values properly
// v1.29 - change to Carousel and offsets form to allow editing of any offset available - datum set buttons only available on current tool though
// v1.29 - added to Carousel and offsets form measured difference form to let you input measured sizes against programmed and it will alter the offset accordingly
// v1.29 - added menu File>Print>Offsets to let user print work and tool offsets out
// v1.29 - fix for workoffsets - didn't update tool offset if tool changed while workoffset window was open.
// v1.29 - added measured/actual difference buttons to workoffset as well as tool offsets.
// v1.29 - bug fixes to G42 cutter comp
// v1.29 - changes to BigMint2 so that M03/M04 wait for spindle to get to speed properly (within 10%)
// v1.29 - updated to new Installation - any issues to do with files not being found or registered (.ocx's) will be down to this

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

JSKRABA
CNC Apprentice
CNC Apprentice
Posts: 50
Joined: Sat 11 Nov , 2006 19:17 pm

Re: VR Turning v1.29 released 24th Aug 2012

Post by JSKRABA » Tue 28 Aug , 2012 12:10 pm

Hi
I am using V1.27 with my Novaturn (Smartstep/3 board) and this version has the Security code in the INI file
Will V1.29 work for me?

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: VR Turning v1.29 released 24th Aug 2012

Post by Denford Admin » Tue 28 Aug , 2012 12:14 pm

yes- I've just double checked that version with a Flash code in vturn.ini, no seckey.tff file and it still works OK

JSKRABA
CNC Apprentice
CNC Apprentice
Posts: 50
Joined: Sat 11 Nov , 2006 19:17 pm

Re: VR Turning v1.29 released 24th Aug 2012

Post by JSKRABA » Tue 28 Aug , 2012 13:15 pm

Hi Thanks
Sorry to trouble you, its OK got very confused with all the versions of software on the PC!!

Post Reply