Ugraded software doesn't see license file

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
suen
Posts: 4
Joined: Mon 08 Mar , 2010 11:38 am

Ugraded software doesn't see license file

Post by suen » Wed 14 Dec , 2011 11:28 am

I have loaded latest version of VR Turning onto computer. Unfortunately it hasn't picked up the existing working license and so won't start. Please advise on what software I need to run in order to browse to the seckey file.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Ugraded software doesn't see license file

Post by Denford Admin » Wed 14 Dec , 2011 13:10 pm

I've added some instructions on browsing a seckey.tff file in this thread:
http://denfordata.com/bb/viewtopic.php?f=9&t=2543

The other parts of the thread may also help you..

Post Reply