VR Turning v1.28 released 30th Nov 2011

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.28 released 30th Nov 2011

Post by Denford Admin » Wed 30 Nov , 2011 14:49 pm

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

v1.27 - Settings like inch/metric and machine selection were being overwritten and lost, when closing the software in v1.26 - fixed in 1.27
v1.28 - found that machine name wasn't being remembered as VRTurn.ini was being updated back to old settings when closing
- updated CD for m03 mod to Bigmint2
v1.28 - updated CD to bigmint2 for mod to make old style threading work again

v1.28 - made and released CD and uploaded to web

Post Reply