VR Turning v1.27 released 26th Jan 2011

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.27 released 26th Jan 2011

Post by Denford Admin » Wed 26 Jan , 2011 12:14 pm

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

// 26/01/2011 v1.27 - Settings like inch/metric and machine selection were being overwritten and lost, when closing the software in v1.26 - fixed in 1.27

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: VR Turning v1.27 released 26th Jan 2011

Post by Denford Admin » Mon 13 Jun , 2011 16:33 pm

CD has been updated to include 32-bit and 64-bit USB drivers.

NB, Any previous installtion guides may tell you to plug the machine's USB cable into the PC first, then search for the drivers on the CD.
With the latest drivers you should run the 32 or 64 bit drivers from the CD first, ie, before connecting the USB cable

Post Reply