Upgraded CycloneNS Stepper stalling.

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Upgraded CycloneNS Stepper stalling.

Post by Martin » Thu 06 Aug , 2009 10:32 am

We have just updated a DOS controlled Cyclone E from a Denstep control card to a NextMove rack mounted USB card.
On running the Acceleration was found to stalling both Axis.

The Ramp values were changed to 15000 for both X & Z.

Attached are the specific modified files.
Attachments
VRTurning.zip
(261.56 KiB) Downloaded 779 times

Post Reply