VR Turning v1.22 released

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.22 released

Post by Denford Admin » Fri 17 Jul , 2009 8:57 am

v1.22 - 16/6/2009 - when G32 is programmed, the F value is remembered as the feed when it shouldn't be - fixed
v1.22 - 10/7/2009 - updates to make spindle stop on M06 and encoder added to microturnNS mint (ie, same as 2000NS)
v1.22 - 13/7/2009 - changes to guard check stuff in microturn and newturn270m mints to make sure spindle doesn't stop after 4 secs if its started up again in the meantime.
v1.22 - 13/7/2009 - checks for NegativeX home being FALSE(for NewTurn270MNS which X homes the wrong way) and forces G28 to go to X plus limit position instead of home

Get latest version from here:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply