VR Turning Compatibility with Starturn LCB3 (1993)

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
paragon
CNC Apprentice
CNC Apprentice
Posts: 43
Joined: Tue 30 Jan , 2007 11:43 am
Location: London

VR Turning Compatibility with Starturn LCB3 (1993)

Post by paragon » Thu 22 Nov , 2007 14:25 pm

Hello Group,

As stated in the heading is VR Turning Software compatible with a Starturn PC lathe which uses an LCB3 control board circa 1993?

Thanks
Steve
Top
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 27 Nov , 2007 16:56 pm

Unfortunately VR Turning only communicates with Baldor control cards - either via RS232 and now USB.
Top
Post Reply

Return to “VR Turning - All Versions”