VR Turning v1.49 released 4th October 2017

Help and advice for Denfords lathe control software VR Turning.

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3587
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.49 released 4th October 2017

Post by Denford Admin » Wed 04 Oct , 2017 16:39 pm

There is a new version of VR Turning

The machine type selected is checked against machine type that the card is programmed with.

The connection to the machine uses the latest DLLs from ABB/Baldor.

This can be downloaded from the address : http://www.denfordata.com/downloads/vrturningv1_49.zip

Post Reply