VR Turning v1.39 released 18 July 2014
Moderators: Martin, Steve, Mr Magoo
- Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
VR Turning v1.39 released 18 July 2014
Version 1.39 has been released. This lowers the acceleration of the tool spindle to deal with issues of the turret stalling.
-
- Posts: 1
- Joined: Thu 11 Apr , 2024 13:36 pm
- Hardware/Software: Hi, im finding the version for a Lathe Cnc, model New Turn 270. The software is VR Turning V1.39
Re: VR Turning v1.39 released 18 July 2014
Hi, Im from Argentina, Im studying in a University (UTN FRT), my university has a Lathe CNC too old, model New Turn 270. The old Essays explains that the Lathe works with this version of software. You can share this version of software with me to the University? Or this Model of Lathe can works with a new version of software?
Re: VR Turning v1.39 released 18 July 2014
Hi Enzo,
You can download the software from:
https://denford.co.uk/software-downloads-support/
V1.55 is the latest version that is compatible with your machine.
but you will need the license file.
if you do not have the license file then you will need to email technical@denford.co.uk regarding a replacement.
KR
Mitch
You can download the software from:
https://denford.co.uk/software-downloads-support/
V1.55 is the latest version that is compatible with your machine.
but you will need the license file.
if you do not have the license file then you will need to email technical@denford.co.uk regarding a replacement.
KR
Mitch