Mitsubishi RV-1 Robot

Help and info about Denfords CIM* and Virtual Reality CIM systems Robots and ASRS**
*(Computer Integrated Manufacturing) **(Automated Storage and Retrieval System)

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
sukyme
Posts: 7
Joined: Fri 14 Jul , 2006 4:39 am
Location: Malaysia
Contact:

Mitsubishi RV-1 Robot

Post by sukyme » Sat 07 Apr , 2007 9:33 am

Hi there,
I'm having problem with my robot which out of battery. I already change it to a new batt. But, all the setting also missing. There's any way to get this setting back?[/b]
260699

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1248
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Wed 11 Apr , 2007 11:29 am

Please read pages 2-10 and 2-11 of the RV-M1 Movemaster Manual

Eg

Before the drive unit is first turned on after the battery has been installed, be sure to flip down (to the OFF postion) bit 2 of SW1 located inside the side door of the unit. After the power has been turned ON, flip up (To the on Position) Bit 2

Post Reply