Set up of Keep Relays on Fanuc 21i Machines for CIM Systems

Help and info about Denfords CIM* and Virtual Reality CIM systems Robots and ASRS**
*(Computer Integrated Manufacturing) **(Automated Storage and Retrieval System)

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1248
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Set up of Keep Relays on Fanuc 21i Machines for CIM Systems

Post by bradders » Thu 23 Feb , 2006 16:35 pm

Set up of Keep Relays on Fanuc 21i Machines for CIM Systems
Last edited by bradders on Thu 23 Feb , 2006 16:38 pm, edited 1 time in total.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1248
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Thu 23 Feb , 2006 16:36 pm

Q. Setup of I/O on the Fanuc 21i machines in a Denford CIM system

A. The FANUC 21i controllers work in a similar way to the Denford controllers regarding auxiliary inputs and outputs, however various parameters must be set to enable them.

1) ON DENFORD FANUC 21i LATHES
Set Keep Relay 1.1 to 1 use auxiliary 2 for chuck
Set Keep Relay 0.1 to 1 Programmable chuck

2) ON DENFORD FANUC 21i MILLERS
Set Keep Relay 1.1 to 1 use auxiliary 2 for vice
Set Keep Relay 0.0 to 1 Programmable vice

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1248
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Thu 23 Feb , 2006 16:37 pm

Q. Set up of Fanuc 21i machines in Denford CIM systems

A.
1) ON DENFORD FANUC 21i LATHES
Set parameter 3201, bit 7 to 1 use “MINP” input
Set Keep Relay K1.4 to 1 use “MINP” input
Set parameter 3411 to 15 the M code M15 is not buffered

2) ON DENFORD FANUC 21i MILLERS
Set parameter 3201, bit 7 to 1 use “MINP” input
Set Keep Relay K1.4 to 1 use “MINP” input
Set parameter 3411 to 15 the M code M15 is not buffered

Post Reply