CIM- TRIAC-Fanuc Problem

Help and info about Denfords CIM* and Virtual Reality CIM systems Robots and ASRS**
*(Computer Integrated Manufacturing) **(Automated Storage and Retrieval System)

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
sukyme
Posts: 7
Joined: Fri 14 Jul , 2006 4:39 am
Location: Malaysia
Contact:

CIM- TRIAC-Fanuc Problem

Post by sukyme » Fri 14 Jul , 2006 4:51 am

Hi there,
I'm from malaysia. How are you graham? We having problem on CIM triac Fanuc which alarm msg display - 1008 Courasel Conflict. Please help me on this. Tq. Have a nice day.
260699

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1247
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Fri 14 Jul , 2006 7:53 am

Hi Captain,

On a Fanuc 21i the 1008 alarm means that the carousel has gone out of sync. i.e. it has lost its position.

1. Take the tools out of the spindle and carousel pocket No1
2. Rotate the carousel with the CW and CCW buttons or M32 and M33 until carousel pocket No1 is in line with the spindle i.e. in its change tool position.
3. Use M27 to reset the carousel

sukyme
Posts: 7
Joined: Fri 14 Jul , 2006 4:39 am
Location: Malaysia
Contact:

Post by sukyme » Mon 17 Jul , 2006 1:25 am

Hi Bradders.
Thanks for your advice. But we can't rotate the carousel wheather by using M32 or M33 buttons. Lastly, i asked for my technician to shut down CIM and start again. Luckly its work! Did my order will effect the CIM to next problem? Please advice my on this. TQ.
260699

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1247
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Mon 17 Jul , 2006 7:44 am

Captain

It should have no effect the the next time the CIM is started, just ensure that the correct tool is selected when running. i.e. do some maunal tool changes and make sure the correct tool is been changed

Post Reply