Project of the week: 3D Laser Cut Fly

A collection of projects for Denford machines that can be performed in schools.

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1293
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Project of the week: 3D Laser Cut Fly

Post by Steve » Tue 07 Jan , 2020 17:59 pm

Create a 3D Slot together Fly

This Project requires a sheet of 3mm thick Acrylic 600mm x 300mm, QuickCAM 2D or LaserCAM software and a Laser Cutter.

Made on Universal Laser cutter VLS 3.5

The model is scaled to produce a friction fit when using 3mm material. The whole model can be scaled to create a tighter or slacker fit if required.

For more details contact Sales@denford.co.uk

IMG_0385.jpg
IMG_0385.jpg (293.82 KiB) Viewed 3516 times
IMG_0032.jpg
IMG_0032.jpg (254.85 KiB) Viewed 3517 times
IMG_0384.jpg
IMG_0384.jpg (469.12 KiB) Viewed 3517 times
IMG_0383.jpg
IMG_0383.jpg (496.24 KiB) Viewed 3517 times
IMG_0381.jpg
IMG_0381.jpg (471.82 KiB) Viewed 3517 times

LaserCAM / QuickCAM 2D Design file


Download the file here

FLY3MM.zip
(458.01 KiB) Downloaded 60 times


Top Tip



Before cutting the part highlight two parts in the top left corner of the work piece by selecting them. Then go to cut these choosing print selected. You can then cut these from a small piece of scrap material check that the parts fit together before cutting the full sheet. If required you can then scale the full model to get a better fit.

select 2.JPG
select 2.JPG (135.04 KiB) Viewed 3517 times
print selected.JPG
print selected.JPG (74.96 KiB) Viewed 3517 times

Post Reply