QuickCAM Pro will not open VR Milling as a normal user

Help and support using the 3D and Bitmap Machining CAM packages:
QuickCAM 3D, QuickCAM 3D Pro, QuickCAM 4D (rotary axis CAM)

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickCAM Pro will not open VR Milling as a normal user

Post by Denford Admin » Wed 10 Jan , 2007 9:46 am

If I am logged the machine as the Administrator and open QuickCam Pro go through the process of producing a file I then get to the last screen which is "Post Proccess" click the button and save the file VR Milling V5 opens but If I perform the same function as a standard user when I click on "Post Proccess" it only saves the file and DOES NOT open VR Milling V5.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Wed 10 Jan , 2007 9:48 am

Because the normal user will be using a different INI file (settings), it may be that the option to output to VR Milling is not turned on..

Check it on the Options menu (see attached) ..
Attachments
qcpro-direct-output-to-vr.gif
Turns on or off, the automatic output of cnc files to VR Milling v5
qcpro-direct-output-to-vr.gif (4.32 KiB) Viewed 4753 times

Post Reply