source for plastic material for image relief ?

Help and support using the 3D and Bitmap Machining CAM packages:
QuickCAM 3D, QuickCAM 3D Pro, QuickCAM 4D (rotary axis CAM)

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
Posts: 1
Joined: Wed 06 Sep , 2006 15:37 pm

source for plastic material for image relief ?

Post by jonluns » Wed 06 Sep , 2006 16:01 pm

Does anyone know the best type of plastic material used for image relief, and a good source in the US?

User avatar
Denford Admin
Site Admin
Posts: 3590
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse

Post by Denford Admin » Thu 07 Sep , 2006 10:54 am

I've used these before (in error really as I didn't realise they were in the states :oops: )
They always seem to have lots of quality acrylic pieces that have been left over from jobs at good prices

Try them out:

You need to be looking for CAST Acrylic, which cuts pictures better than extruded acrylic. Go for 3mm or 1/8th inch thickness
The stuff I got from FRIGO had a brand name of Lucite - maybe something to search the internet for

Post Reply