QuickCAM 4D v1.9 release 11th Sept 2009

Help and support using the 3D and Bitmap Machining CAM packages:
QuickCAM 3D, QuickCAM 3D Pro, QuickCAM 4D (rotary axis CAM)

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3587
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickCAM 4D v1.9 release 11th Sept 2009

Post by Denford Admin » Fri 11 Sep , 2009 10:45 am

// v1.9 - 23/5/2007 - changed the fnc output on linear strategy to put the A axis moves on seperate lines (seemed to be stalling Y with Y+A moves try to interpolate in turbo)
// v1.9 - 11/09/2009 - fix to alter billet size fully when altering the centre of rotation point. It wasn't updating the billet edit boxes, just the billet size at the bottom
// v.19 - 11/09/2009 - Fixes to make sending CNC output to VRMilling 2 or 5 more reliable than before (CNCExport)

As usual - check here for the latest version:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply