List Index Out Of Bounds on final screen
Posted: Thu 23 Oct , 2008 15:49 pm
If you get a message like this:
List Index Out Of Bounds -1
When you get to the final post output screen in QuickCAM 3D or Pro, then there is something wrong with the way the software has been installed - its probably a network drive issue, or the software needs removing and re-installing again.
To check, you should have a list of files like these in this directory:
C:\Documents and Settings\All Users\Application Data\Denford\Posts
Boxford V10.ppl
Denford (Floating Head Metric).ppl
Denford (Inch).ppl
Denford (Metric).ppl
Denford (Soft Metric).ppl
DenfordPostProcessor.zip
eduCAM.ppl
Larken Camtool Router.ppl
MultiCAM Router.ppl
Pacer.ppl
Post Help.txt
proLight.ppl
Roland Modela.ppl
Techno-G-Code.ppl
Triac PNC.ppl
List Index Out Of Bounds -1
When you get to the final post output screen in QuickCAM 3D or Pro, then there is something wrong with the way the software has been installed - its probably a network drive issue, or the software needs removing and re-installing again.
To check, you should have a list of files like these in this directory:
C:\Documents and Settings\All Users\Application Data\Denford\Posts
Boxford V10.ppl
Denford (Floating Head Metric).ppl
Denford (Inch).ppl
Denford (Metric).ppl
Denford (Soft Metric).ppl
DenfordPostProcessor.zip
eduCAM.ppl
Larken Camtool Router.ppl
MultiCAM Router.ppl
Pacer.ppl
Post Help.txt
proLight.ppl
Roland Modela.ppl
Techno-G-Code.ppl
Triac PNC.ppl