Corel Draw X4

Help and support using the 3D and Bitmap Machining CAM packages:
QuickCAM 3D, QuickCAM 3D Pro, QuickCAM 4D (rotary axis CAM)

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
chrisv
Posts: 11
Joined: Fri 25 Jan , 2008 15:19 pm
Location: South Wales

Corel Draw X4

Post by chrisv » Mon 29 Sep , 2008 12:38 pm

Does anyone know if Quickcam Pro v1.9 is compatible with Corel Draw X4, as we are thinking of upgrading?

Thanks in advance

Chris Vaudin

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Thu 02 Oct , 2008 9:33 am

Hi - not sure how you mean compatible ?
QuickCAM PRO will only load up 3D .STL files and it looks like Corel X4 is predominantly 2D editing

Did you mean QuickCAM 2D ?

User avatar
chrisv
Posts: 11
Joined: Fri 25 Jan , 2008 15:19 pm
Location: South Wales

Post by chrisv » Mon 06 Oct , 2008 9:17 am

You're right, a slight mental aberration on my part!

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Mon 06 Oct , 2008 10:20 am

:lol: It should be ok with QuickCAM 2D

There are 3 ways to get the Corel design into QuickCAM:
Export a .DXF file and import into QuickCAM
Select the design in Corel, copy and paste into QuickCAM
Export an .EPS file and import into QuickCAM (recommended)

User avatar
chrisv
Posts: 11
Joined: Fri 25 Jan , 2008 15:19 pm
Location: South Wales

Post by chrisv » Mon 06 Oct , 2008 12:42 pm

Finally got the boss to tell me what he was up to - it was him who asked me to post the original question. All he's doing is importing photographs from Corel to produce lithophanes, so there should be no problems there. Isn't it easier when you know what someone is trying to do???

Post Reply