"Context Deactivation Failed" Error
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
"Context Deactivation Failed" Error
I get a "Context Deactivation Failed" Error when i try and run Tool Path Simulation inn Quickcam Pro ver 1.3
- Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Context errors are to do with OpenGL graphics card/driver errors.
eg, could also appear as "context not created"
1. Make sure your graphics card driver is up to date.
2. Upload the latest version from our website www.denford.co.uk -
latest versions have been fixed to work with the latest OpenGL version 2.xx
3. If all else fails - turn the hardware acceleration off in order to use the Microsoft software based OpenGL support - will be slower
eg, could also appear as "context not created"
1. Make sure your graphics card driver is up to date.
2. Upload the latest version from our website www.denford.co.uk -
latest versions have been fixed to work with the latest OpenGL version 2.xx
3. If all else fails - turn the hardware acceleration off in order to use the Microsoft software based OpenGL support - will be slower