Page 1 of 1
QuickCAM 3D V3.2
Posted: Fri 02 Nov , 2007 20:07 pm
by RonShealer
I have QuickCAM 3D V3.2. Will this work ok for milling out a CO2 dragster? I will use Inventor for drawing and save as an STL. Looks like it will pull the inventor drawings right in, just didn't turn on the Denford Router yet.
Thanks
Posted: Fri 02 Nov , 2007 22:53 pm
by Martin
The current version is 3.7
You can dowload the new version from,
http://www.website.denford.ltd.uk/suppo ... -downloads
Yes it is ok for the F1 dragster.
Posted: Mon 05 Nov , 2007 12:42 pm
by Denford Admin
It will only import STL files, and I would recommend getting the latest version as we have had past issues with different versions of ASCII and binary STL formats.
Posted: Mon 05 Nov , 2007 12:53 pm
by Steve
Ron,
First get the latest version.
Then go to help and tutorials.
There is a F1 R6 US tutorial that will take you through CAM and Manufacture. There is also a section on design using ProDesktop but just follow the tutorial from the stage where you save the STL file.
There is also an advanced guide you can read.
viewtopic.php?t=120