Denford Software & Machines

Posted: **Fri 02 Nov , 2007 20:07 pm**

I have QuickCAM 3D V3.2. Will this work ok for milling out a CO2 dragster? I will use Inventor for drawing and save as an STL. Looks like it will pull the inventor drawings right in, just didn't turn on the Denford Router yet.

Thanks

Posted: **Fri 02 Nov , 2007 22:53 pm**

The current version is 3.7

You can dowload the new version from,

http://www.website.denford.ltd.uk/suppo ... -downloads

Yes it is ok for the F1 dragster.

Posted: **Mon 05 Nov , 2007 12:42 pm**

It will only import STL files, and I would recommend getting the latest version as we have had past issues with different versions of ASCII and binary STL formats.

Posted: **Mon 05 Nov , 2007 12:53 pm**

Ron,

First get the latest version.

Then go to help and tutorials.

There is a F1 R6 US tutorial that will take you through CAM and Manufacture. There is also a section on design using ProDesktop but just follow the tutorial from the stage where you save the STL file.

There is also an advanced guide you can read.

viewtopic.php?t=120