"Context Deactivation Failed" Error
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
"Context Deactivation Failed" Error
I get a "Context Deactivation Failed" Error when i try and run Tool Path Simulation inn Quickcam Pro ver 1.3
- Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Context errors are to do with OpenGL graphics card/driver errors.
eg, could also appear as "context not created"
1. Make sure your graphics card driver is up to date.
2. Upload the latest version from our website www.denford.co.uk -
latest versions have been fixed to work with the latest OpenGL version 2.xx
3. If all else fails - turn the hardware acceleration off in order to use the Microsoft software based OpenGL support - will be slower![Sad :(](./images/smilies/icon_sad.gif)
eg, could also appear as "context not created"
1. Make sure your graphics card driver is up to date.
2. Upload the latest version from our website www.denford.co.uk -
latest versions have been fixed to work with the latest OpenGL version 2.xx
3. If all else fails - turn the hardware acceleration off in order to use the Microsoft software based OpenGL support - will be slower
![Sad :(](./images/smilies/icon_sad.gif)