Denford/UP plus printer

Help with the hardware and software of the PP3DP UP! 3D Printer

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
cristec
Posts: 4
Joined: Tue 14 Aug , 2012 21:28 pm

Denford/UP plus printer

Post by cristec » Tue 12 May , 2015 23:04 pm

I have a denford plus printer that will not connect to the computer, it will initialize from the switch on the front, all the axis home ok and the led changes to green.
This is the same on a PC and a Mac that has been used previously with no problem, USB lead has also been replaced.
I believe that the daughter board is at fault, how do I obtain a replacement, I looked at the available parts in your online shop but they are not listed.
Any help would be appreciated.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1247
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: Denford/UP plus printer

Post by bradders » Wed 13 May , 2015 15:03 pm

Can you contact Denford's tech, on 01484 728000

Post Reply