Wall thickness printing as two 'skins'
Posted: Tue 18 Mar , 2014 17:00 pm
Hi, new to 3D printing and have an UP! Plus 2 with ABS running from a Mac, V2.0 (3) software.
I've been printing some parts just to check final dimensions, etc. but I am having trouble with wall thicknesses. I really want to print parts with solid 1.2mm or 1.6mm wall thicknesses but they seem to come out as just two 'skins' with a cavity in between for walls instead of solid or filled. If I go up to 2mm then they get filled.
I can't seem to find anything in settings to change this. Any ideas how to get solid or at least filled walls?
Thanks in advance.
I've been printing some parts just to check final dimensions, etc. but I am having trouble with wall thicknesses. I really want to print parts with solid 1.2mm or 1.6mm wall thicknesses but they seem to come out as just two 'skins' with a cavity in between for walls instead of solid or filled. If I go up to 2mm then they get filled.
I can't seem to find anything in settings to change this. Any ideas how to get solid or at least filled walls?
Thanks in advance.