Denford Software & Machines

Denford Software & Machines

 
 

Denford Software & Machines

Welcome to the Denford CAD CAM CNC forum


Hint - Try the google search at the bottom of the page
It is currently Tue 14 Aug , 2018 20:32 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Unable to prepare layers for printing
PostPosted: Thu 27 Feb , 2014 13:57 pm 
Offline

Joined: Thu 27 Feb , 2014 13:35 pm
Posts: 5 Hardware/Software: Milling, 3D UP!, Laser, HP 3D Printer,
The UP keeps bringing up the following messages:

Error 021: SD card full
Can't create motion print

It then doesn't print, any clues?


Attachments:
File comment: One of the messages
Doc1.docx [301.78 KiB]
Downloaded 252 times
Top
 Profile  
 
 Post subject: Re: Unable to prepare layers for printing
PostPosted: Fri 28 Feb , 2014 7:57 am 
Offline
CNC Guru
CNC Guru
User avatar

Joined: Mon 13 Feb , 2006 12:35 pm
Posts: 1247
Location: Brighouse, England
I guess this is a problem about the SD card. Turn off the printer and close the software. Remove the front cover of the printer, reinsert the SD card.

UP Inspector
Close the UP software and locate the UP Inspector program located in:
C:\Program Files (x86)\UP\ UPInspector.exe
Run the UP Inspector and Click TestSD card.
If the SD card completes successfully then try printing again.

If you still have trouble then:
Reformat the MicroSD Card


Top
 Profile  
 
 Post subject: Re: Unable to prepare layers for printing
PostPosted: Fri 28 Feb , 2014 9:57 am 
Offline
CNC Guru
CNC Guru
User avatar

Joined: Mon 13 Feb , 2006 12:35 pm
Posts: 1247
Location: Brighouse, England
The classical turning it off and on again usually works if the problem crops up.

But, if it doesn't, it will be because the SD card is corrupt and hasn't been programmed properly by the software. This can be fixed using the UP Inspector software which comes installed on the users computer when the standard UP Software is installed. This can be found by connecting the UP printer and going to C:\Program Files (x86)\UP\ UPInspector.exe

Once the software is opened the user simply has to press the "Test SD Card" button and the software will scan the SD card in the UP printer. If the SD card has any major problems the user simply has to follow the on screen instructions in the software to wipe the SD card and start from scratch.

Hope this helps,


Top
 Profile  
 
 Post subject: Re: Unable to prepare layers for printing
PostPosted: Fri 28 Feb , 2014 13:15 pm 
Offline

Joined: Thu 27 Feb , 2014 13:35 pm
Posts: 5 Hardware/Software: Milling, 3D UP!, Laser, HP 3D Printer,
Thank you for the tips.
I have done both of the suggestions, but it is still coming up with the Can't write to SD card error 021.
When I tried the UP inspector, it was saying error no SD card.
I looked to ensure it was in place, it is but really hot?

Any clues?

Thanks


Top
 Profile  
 
 Post subject: Re: Unable to prepare layers for printing
PostPosted: Mon 03 Mar , 2014 12:08 pm 
Offline
CNC Guru
CNC Guru
User avatar

Joined: Mon 13 Feb , 2006 12:35 pm
Posts: 1247
Location: Brighouse, England
Can you try another SD card ?


Top
 Profile  
 
 Post subject: Re: Unable to prepare layers for printing
PostPosted: Wed 05 Mar , 2014 16:46 pm 
Offline

Joined: Thu 27 Feb , 2014 13:35 pm
Posts: 5 Hardware/Software: Milling, 3D UP!, Laser, HP 3D Printer,
Thank you,

I tried another SD card and it worked!

We have now ordered a new SD card.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL
[ Time : 0.313s | 17 Queries | GZIP : Off ]
 
Loading