UP! 3D Printer enclosure

Help with the hardware and software of the PP3DP UP! 3D Printer

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
j.zarzoso
Posts: 2
Joined: Mon 03 Jun , 2013 12:09 pm
Hardware/Software: Computer:
Inte Core i3-2100 CPU @ 3.10GHz
3.11 GHz, 3.49 GB of RAM
System:
Windows XP

UP! 3D Printer enclosure

Post by j.zarzoso » Mon 03 Jun , 2013 12:13 pm

Hi all,

Could anyone please suggest an enclosure to keep the temperature level without overheating the electronics?

Thanks!

Jaime

User avatar
Denford Admin
Site Admin
Posts: 3586
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: UP! 3D Printer enclosure

Post by Denford Admin » Tue 04 Jun , 2013 9:24 am

There is a nice design here:
http://www.pp3dp.com/forum/viewtopic.ph ... ure#p13959
and another here:
http://www.thingiverse.com/thing:34032

You're right to worry about the electronics - I'd just make sure there is plenty of airflow through the bottom half of the UP!

j.zarzoso
Posts: 2
Joined: Mon 03 Jun , 2013 12:09 pm
Hardware/Software: Computer:
Inte Core i3-2100 CPU @ 3.10GHz
3.11 GHz, 3.49 GB of RAM
System:
Windows XP

Re: UP! 3D Printer enclosure

Post by j.zarzoso » Thu 06 Jun , 2013 9:56 am

Thanks for the info, much appreciated!

I could also find this option in plexiglass: http://www.thingiverse.com/thing:43859

Thanks again!

Post Reply