The latest version of Software for the UP! can be found here

Help with the hardware and software of the PP3DP UP! 3D Printer

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1226
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

The latest version of Software for the UP! can be found here

Post by Steve » Mon 16 Jan , 2012 10:47 am

The current version of software for the UP! Printer can be downloaded from this site:


http://www.pp3dp.com/index.php?option=c ... ry&catid=1

User avatar
Denford Admin
Site Admin
Posts: 3586
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: The latest version of Software for the UP! can be found

Post by Denford Admin » Tue 02 Oct , 2012 10:57 am

The latest version 1.17 is now available (October 2012)
New firmware (ROM) files are included which will now allow the UP! Printer to create prints down to 0.015mm layer thickness
The UP! Mini will now allow 0.020mm layer thickness

ianlpowell
Posts: 3
Joined: Fri 02 Nov , 2012 13:30 pm
Hardware/Software: UP! 3D Plus Printer

Re: The latest version of Software for the UP! can be found

Post by ianlpowell » Fri 02 Nov , 2012 13:34 pm

Is this the beata version?

BTW I can't link to www.pp3dp.com at the moment is ther a problem?

Ian

User avatar
Denford Admin
Site Admin
Posts: 3586
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: The latest version of Software for the UP! can be found

Post by Denford Admin » Fri 02 Nov , 2012 14:51 pm

1.17 is officially released now.
There is a 1.18 beta also available which has software platform level compensation in it.
I can't find the link because the pp3dp forum is down (yet again) :(

ianlpowell
Posts: 3
Joined: Fri 02 Nov , 2012 13:30 pm
Hardware/Software: UP! 3D Plus Printer

Re: The latest version of Software for the UP! can be found

Post by ianlpowell » Mon 05 Nov , 2012 11:16 am

I have just managed to downloaded version 1.17 but when I try and run the setup program I get a message saying it is not compatible with my version of windows.

I am running Windows 7 Ultimate 64bit. I don’t usually have any problems with 32 bit programs only drivers.

I have no problem with version 1.6. Also I have tried downloading a second time in case it got corrupted.

Any ideas?

User avatar
Denford Admin
Site Admin
Posts: 3586
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: The latest version of Software for the UP! can be found

Post by Denford Admin » Mon 05 Nov , 2012 12:12 pm

It appears that either the source file is corrupt or it is getting corrupted during transfer...I've just downloaded it and it won't install for me either.
Luckily I still have the 1.17 file I downloaded previously and have posted it here:
http://www.denfordata.com/downloads/up1.17_setup.exe

ianlpowell
Posts: 3
Joined: Fri 02 Nov , 2012 13:30 pm
Hardware/Software: UP! 3D Plus Printer

Re: The latest version of Software for the UP! can be found

Post by ianlpowell » Mon 05 Nov , 2012 16:26 pm

Thanks that works now.

Post Reply