Quatro photos

What little info there is on the QuatroMill

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3592
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Quatro photos

Post by Denford Admin » Wed 09 May , 2012 13:14 pm

Quatro mill with PNC3
Attachments
quatro-pnc3.jpg
quatro-pnc3.jpg (77.1 KiB) Viewed 2576 times

bikermickyc
Posts: 16
Joined: Wed 11 Jul , 2012 19:01 pm
Hardware/Software: Denford Quatromill any help in setting up etc appreciated as we have just got one from auction- has a heidenhain controller- and seems good nick no backlash in screws etc- have any members any experience of this well built machine- thanks mike

Re: Quatro photos

Post by bikermickyc » Wed 11 Jul , 2012 19:52 pm

heres a few of Mine- Mike
Attachments
quatro heidenhain .jpeg
quatro heidenhain .jpeg (26.05 KiB) Viewed 2490 times
Quatro board .jpg
Quatro board .jpg (490.55 KiB) Viewed 2490 times
quatromill full pic.jpg
quatromill full pic.jpg (82.35 KiB) Viewed 2490 times

Post Reply